Revised on
01/30/17 10:21am

Hazardous Waste Storage and Labeling

Contact information

Labeling Information

Labeling Requirements

Safety Net #110 contains detailed instruction on how to properly complete the waste label.

To comply with regulations regarding the accumulation of hazardous waste on-site, all hazardous waste must be labeled with the following information:

  • The words "Hazardous Waste"
  • name and address of generator
  • date of initial accumulation
  • date that the 90-day period begins
  • the composition and physical state of the waste
  • a statement which calls to attention the particular hazardous properties of the waste.

Containers must be labeled and dated as soon as you begin accumulating the waste. For unused chemicals, the accumulation date would be the date that the label is applied. If you have an unknown chemical, write "unknown" as the composition, but indicate any information you may have as to its physical properties or possible identity. For waste solvent collection bottles, list all chemicals on the label as they are added and calculate the percent composition after the bottle is filled. 

Accumulation Time

Under no circumstances can hazardous waste be accumulated on campus for more than one year. Since this one year period includes 90 days that EH&S may have to store it at the Environmental Services Facility prior to shipment, hazardous wastes should not be accumulated in laboratories for more than nine months.

There is one major exception to the maximum accumulation period of one year. Some extremely hazardous wastes such as hydrofluroic acid, arsenic or cyanide-containing wastes, may not be accumulated for more than 90 days if certain volume limits are exceeded. For this reason, EH&S advises removal of all hazardous waste as soon as containers are full or at least every 90 days.

If your laboratory generates wastes in small quantities, or at low rates, and you wish to accumulate your waste for up to nine months, please contact EH&S to make sure that your waste is not extremely hazardous.

Proper Storage and Segregation

  • All hazardous wastes must be stored in suitable containers in good condition, that are compatible with the chemical contents of the waste. The waste container must be sealed at all times unless waste is being added or removed. A secondary container should be used to contain the material in case the primary container is overfilled or fails. Leave ample head space in all liquid waste containers to allow for expansion.
  • All waste streams should be segregated and properly stored to insure that chemical reactions will not occur if containers were to fail. Information to assist you in segregation can be found on material safety data sheets and/or chemical references. Contact EH&S before mixing compatible waste streams. There may be limitations imposed by the chemical profile for the waste stream, or the treatment technology used to process the waste.
  • Maintain your waste in a secure area. Access to waste containers should be limited to personnel who are properly trained in your facility's chemical hygiene, and emergency contingency plans.

 

For additional information on Hazardous Waste Management and Minimization Training click here.