Revised on
01/26/17 02:45pm
SafetyNet #

Safe Operation of Livestock Squeeze Chute Functions

SafetyNet 145 Image 1SafetyNet 145 Image 2


Squeeze chutes are operated by one or more persons and routinely used as part of livestock handling operations. Safe operation of livestock squeeze chutes can prevent most injuries and sometimes deaths, to employees and/or livestock during handling operations. Typically, injuries from livestock squeeze chutes include contusions, cuts, abrasions, and broken bones to employees and livestock. California Code of Regulations Title 8, Section 3203 (7) requires employees be trained on the equipment they use in the workplace.

General Recommended Practices for Safe Operation of Livestock Squeeze Chutes

    • Prior to using a livestock squeeze chute, communication is essential to safely coordinate participant’s actions for loading and unloading livestock into the chute with worker operation of chute hydraulics and mechanics.
    • Prior to use, always inspect the livestock squeeze chute for defects or leaks and to assure they are securely attached at connection points. In addition, examine and test levers, latches, and moveable chute parts to assure they are not damaged and are functioning properly. Tighten loose bolts and nuts. Check hydraulic hoses and fittings where applicable.
    • If a livestock squeeze chute fails the pre-use inspection, notify your supervisor and remove the chute from service by attaching a red tag that states “DO NOT USE.” Complete red tag with appropriate information.
      • Date
      • Reason for Red Tag
      • Name of observer
    • Do not wear loose clothing or jewelry in the vicinity of moving parts on the livestock squeeze chute. Tie back long hair or wear under a cap or hard hat.
    • As necessary, wear boots, gloves, long pants, and eye and head protection when using a livestock squeeze chute.Keep the livestock squeeze chute work area clean and free of trip hazards.
    • Avoid startling or spooking livestock during handling operations.
    • Be alert and aware of potential sudden changes in conditions when handling livestock.
    • Always utilize good animal husbandry practices when handling livestock.
    • Ensure side access panels are fully engaged (closed)
    • Keep feet, arms, hands, and fingers clear of gates and other moving squeeze chute parts.

    Squeeze Chute Safety:

    There are four basic areas of a chute that are inherently hazardous:

    1. The head gate,
    2. Side squeeze,
    3. Side exit/access and
    4. Rear gate.

    Safety risks can be broken down into moderate and severe within each of those areas. Review this poster with your employees:

    Equipment Hydraulic Chute Safety:

    • Safe, efficient and trouble free operation of your squeeze chute requires the that you, and everyone else who will be using or maintaining the squeeze chute, read and understand the Safety and Maintenance information contained within the Operator's Manual.

    Equipment Operator's Manual:

    • Employees must remember they are the key to safe operation of this equipment. On1y authorized and trained operators shall be allowed to operate the equipment. Good safety practices will protect you and the people around you.  Squeeze equipment operators must read and be familiar with the complete operation, service and maintenance procedures, and follow all safety precautions. Do not risk injury or death by ignoring good safety practices.
    • Keep this manual handy for frequent reference and to pass on to new users. Call your squeeze chute manufacturer with any questions or if you need assistance or for additional copies of the manual.

    Operating Manual Instructions:

    • Have employees sign-off on reading the squeeze chute operation manual and observe all safety precautions in the equipment operation manual. Besides operation, note emergency shutdown, adjustment, and troubleshooting procedures. Especially note “Warning” or “Danger” notifications identified in the operation manual. Read this manual carefully to learn how to use the equipment.

    Manual Read: __________________ Date: ___________


    Employee Name ______________________________


    Employee Signature: __________________________

    • Conclude employee training with a documented ‘hands’ on demonstration.

    Employee Field Demonstration of ‘Hands on’ knowledge

    Instructor: _________________________

    Date: ___________

    Employee Name: ____________________

    Employee Signature: __________________________